Please refer to the installation guide.

1) Place container, align the Silver Dot on Container to match the Silver Dot on Main Body.

2) Align the Black Dots on the Filter to the Silver Dots on the Container.Put the filter in to container until the filter can't be rotated.

3)Press the Auger into the Filter until the Auger can't be easy to pull up.

4)Align the“ALlGN ”on edge of Lid match the Silver Dot on the edge of Container, put the lid onto the container, and rotate the lid then the “LOCK” will match the Silver Dot on the container.

Note: If the problem still exists, please contact customer service at support@aeitto.com. Please attach a video so that we can solve the problem for you faster.

Please check whether it is installed correctly.

Please follow the guidance and try again.

1) Place container, align the Silver Dot on Container to match the Silver Dot on Main Body.

2) Align the Black Dots on the Filter to the Silver Dots on the Container.Put the filter in to container until the filter can't be rotated.

3)Press the Auger into the Filter until the Auger can't be easy to pull up.

4)Align the“ALlGN ”on edge of Lid match the Silver Dot on the edge of Container, put the lid onto the container, and rotate the lid then the “LOCK” will match the Silver Dot on the container.

Note: If the problem still exists, please contact customer service at support@aeitto.com. Please attach a video so that we can solve the problem for you faster.

Please check whether it is installed correctly.

Please follow the guidance and try again.

1) Place container, align the Silver Dot on Container to match the Silver Dot on Main Body.

2) Align the Black Dots on the Filter to the Silver Dots on the Container.Put the filter in to container until the filter can't be rotated.

3)Press the Auger into the Filter until the Auger can't be easy to pull up.

4)Align the“ALlGN ”on edge of Lid match the Silver Dot on the edge of Container, put the lid onto the container, and rotate the lid then the “LOCK” will match the Silver Dot on the container.

Note: If the problem still exists, please contact customer service at support@aeitto.com. Please attach a video so that we can solve the problem for you faster.

This is because the juicer is overheated and E0 protection will appear. Please let it sit for at least an hour before using it. It is recommended not to use it for more than 10 minutes at a time.

Note: If the problem still exists, please contact customer service at support@aeitto.com. Please attach a video so that we can solve the problem for you faster.

We recommend peeling the skin, the taste and juicing effect will be better. If it is not peeled, the taste will be more bitter. But the lime needs to be seeded, and the ginger cannot be old ginger, but young ginger is fine. Juicing lemons and limes should be done sparingly, or too much at once, as the acidity can make the accessories more susceptible to damage.

Note: If you have any questions, please contact our professional customer service at support@aeitto.com.Thank you.

All accessories cannot be placed in the dishwasher, except HSJ-1518.

Note: If you have any questions, please contact our professional customer service via support@aeitto.com.Thank you.

Please try the following 3 ways to open the lid.

1. Please check if there is pomace clogged inside the lid, and if so, see if it can be cleaned out from the feed port.

2. Turn the lid to the "Lock" position.After pressing and holding REV several times, see if you can open the lid with a lot of force.

3. Violently damage the lid in order to remove the lid. Please be careful not to hurt yourself.

Note: If the problem still exists, please contact customer service at support@aeitto.com. Please attach a video so that we can solve the problem for you faster.

We recommend slowing down the feeding speed, squeezing one cup of juice and then cleaning it before continuing to juice.

Factors causing slag blocking:

1. The Filter has not been cleaned and many holes are blocked;

2. Feeding speed is too fast

3. It is recommended to use hard mode.（for HSJ-1518 & HSJ-1521）

Note: If the problem still exists, please contact customer service at support@aeitto.com. Please attach a video so that we can solve the problem for you faster.

Make sure the lid of the juicer is closed.

Note: If the problem still exists, please contact customer service at support@aeitto.com. Please attach a video so that we can solve the problem for you faster.

This is a protection device for the juicer. After opening the lid and adding ingredients, you need to close the lid again to work properly.

Note: If the problem still exists, please contact customer service at support@aeitto.com. Please attach a video so that we can solve the problem for you faster.

Please use pliers to pull the top rod of the micro switch and pull it back and forth several times to keep it smooth before trying to install it.

Note: If the problem still exists, please contact customer service at support@aeitto.com. Please attach a video so that we can solve the problem for you faster.

1-Please make sure the lid of the juicer is open

2-Try to rotate the Top Lid (with container) forcefully

Note: If the problem still exists, please contact customer service at support@aeitto.com. Please attach a video so that we can solve the problem for you faster.

Accessories can be removed and rinsed directly with water or with added detergent. If the Filter is difficult to clean, you can use a brush and rinse it with water at the same time. It is recommended to wash it immediately after use for easier cleaning.

Note: The main unit of the juicer cannot be cleaned directly with water. It can be wiped with a wrung wet cloth.

We recommend continuous working time less than 10 minutes, and cut vegetables to strips(less than 3.9inch), slow down the feeding speed, which will help prolong the life of Juicer.

Note: The main unit of the juicer cannot be cleaned directly with water. It can be wiped with a wrung wet cloth.

It may be that the juicer is overloaded. It is recommended to let it cool down for at least 3 hour and then try again.

Note: The main unit of the juicer cannot be cleaned directly with water. It can be wiped with a wrung wet cloth.

We recommend cutting the celery within 3 inches, slowing down the feeding speed to reduce the occurrence of this problem, and it is best to clean up after juicing a cup.

Note: If the problem still exists, please contact customer service at support@aeitto.com. Please attach a video so that we can solve the problem for you faster.

Please try pressing the "Rev" function a few times to see if you can push out the clogged celery, then try removing the accessory.

Note: The main unit of the juicer cannot be cleaned directly with water. It can be wiped with a wrung wet cloth.

For AMR8824: Juicing parsley is not recommended.

All juicers: Not recommended for juicing old ginger and lots of lemons.

Note: If you have any questions, please contact our professional customer service via support@aeitto.com.Thank you.

We do not recommend juicing ginger with a juicer. It is okay to squeeze a small amount of young ginger occasionally, but if you need to squeeze ginger juice frequently, it will affect the life of the juicer.

Note: If you have any questions, please contact our professional customer service via support@aeitto.com.Thank you.

We recommend juicing as few lemons as possible, or not juicing too many lemons at once, as acidity can make accessories brittle and affect the life of the juicer.

Note: If you have any questions, please contact our professional customer service via support@aeitto.com.Thank you.

All our juicers are for home use only and are not recommended for commercial use as it will damage the service life of the juicer.

Note: If you have any questions, please contact our professional customer service via support@aeitto.com.Thank you.

This is the reflux of juice caused by clogging. Please remove the Filter and clean it.

Note: If the problem still exists, please contact customer service at support@aeitto.com. Please attach a video so that we can solve the problem for you faster.

Please try soaking it in the detergent to soften it for a few hours, and then use a brush to see if it can be cleaned. If that doesn't work, try something like vinegar.

It is recommended to clean after each juice extraction. If it cannot be cleaned in time, you can soak it first, so as to avoid the juice being dry and difficult to clean.

Note: If the problem still exists, please contact customer service at support@aeitto.com. Please attach a video so that we can solve the problem for you faster.